Repair Tips for Your Ice Maker: Ice Will Not Eject

A portable ice maker is a great way to make ice faster and easier. If you are always running out of ice, an ice maker is an easy answer. During the summer months, you are going to be giving your ice maker a workout. For this reason, it is important to make sure that you are using it in the right way so that it lasts for many years to come.

Even if you take great care of your ice maker it will not last forever. There is going to be a time when you will have to have it repaired. When your ice maker breaks down you have two options. You can take your ice maker to a professional or you can make the repairs yourself. There are pros and cons to each option and in some cases, the only option will be to have a professional come in to fix the problem.

portable ice maker repair tips

Pros and Cons of Using a Professional

Using a professional to fix your ice maker comes with several pros and cons. The main benefit of using a professional is that your machine is going to be fixed by an expert, which means that everything will be done correctly. The main downfall of using a professional for repairs is the cost.

Pros and Cons of Doing it Yourself

The other option to repair your ice maker yourself. When you fix your ice maker yourself you are going to save a lot of money. There are manuals that can be used as guides to make most of the repairs on your machine, so at times this is the best option.

The big problem with making the repairs yourself is that the repair is done by a non-expert and therefore can be unreliable. In addition, when you do the repair yourself you run the risk of making the issue worse.

Troubleshooting before Calling a Repair Service

Before you call a repair service to come in and fix your ice maker, you can follow a troubleshooting guide. One of the biggest problems that arise with these ice makers is they simply stop making ice. When this happens there are several things that you can do in order to try to fix it yourself.

Ice Maker Repair Tips

Below you will find some of the common reasons that your ice maker has stopped making ice and how to fix them.

Lodged Cubes:

At times ice cubes lose their way. When this happens you can use a hair dryer on high heat to melt the ice cube. Once the cube is melted the ice maker should work again.

Freezer Temperature:

The freezer temperature should be set between 0 and 5 degrees Fahrenheit. Check the evaporator coils to see if frost has accumulated on them. If this happens the defrost system will fail.

Water inlet valve defect:

The water inlet valve is what supplies the water to the ice dispenser and the ice maker. If this valve is defective or if there is insufficient pressure, the water will not flow through the machine. Water pressure needs to be at least 20 psi in order for the machine to work. If the pressure is low, it may be time to replace the water inlet valve.

Ice Maker Assembly:

Ice maker components are often not sold separately,the whole thing may need to be replaced,if a part becomes defective. Check the water line, the water inlet valve, and the fan first. If your ice maker is constantly staying above 10 degrees Fahrenheit it is time to replace the ice maker assembly.

Icemaker Module Defective:

When the icemaker module is defective your ice maker will not make ice. Check the bail arm to make sure that it is in the down position or that the switch is in the on position. Also, check the ejector blades to make sure there are no ice cubes stuck in them.

Low home water pressure:

If your home has low water pressure your ice machine may not work properly. You need to have at least 20 psi of pressure in order for the ice maker to eject ice. Check the water pressure to make sure that it is sufficient.

Clogged water filter

If the water filter becomes dirty or clogged your ice maker will not work properly. You need to replace the filter once every six months in order to maintain the proper water flow to the machine.

Defective Thermostat

The thermostat monitors the temperature of the ice tray. When the right temperature is reached by the mold the ice cubes are ejected and the mold will be refilled with water. When the thermostat is not working properly the ice maker will not make ice. You can use a multimeter in order to test the continuity of the thermostat.

Defective Switch

The problem could be as simple as the switch being turned off by accident. If the switch is on and not working, try replacing it.

Safety Issues

When your ice maker is failing to make ice it there are many things that could be wrong. It is a good idea to troubleshoot the problems at first. You can check everything listed above to determine if one of those issues is the problem and fix it yourself.

If you choose to repair your ice maker yourself you need to make sure to consider your safety. First, make sure that the ice maker is unplugged before you attempt to do any repairs. Next, familiarize yourself with all of the parts of the ice maker. If you still think that you can do the repair or replace the necessary parts, you can begin the process. However, if you are second guessing your abilities or if the problem seems complicated, call in a professional to fix your machine. This will guarantee that that problem is solved quickly and correctly and you will have ice again before you know it.

Click Here to Leave a Comment Below

Leave a Reply: